Comparative Study and Static Analysis of Piston Using Solid Edge and Ansys

Abstract

A piston is a component of reciprocating engines. The purpose of piston is to transfer force from expanding gas in the cylinder to the crankshaft via a piston rod and a connecting rod. It is one of the most complex components of an automobile. In This project we are describes the Thermal analysis by using finite element method (FEM). The specifications used for designing the piston belong to four stroke single cylinder engine of piston. Modeling of piston are done using SOLID EDGE v20. static structural, Thermal and fatigue analysis is performed by using ANSYS WORKBENCH 2022 R1. The parameters used for the simulation are operating gas pressure, material properties of piston. The results predict the maximum stress and strain on pistons using FEA. The best material is selected based on static structural, thermal and fatigue analysis. The analysis results are used to optimize piston geometry of best two Materials.

Introduction

I. INTRODUCTION

A piston is a component of reciprocating engines, reciprocating pumps, gas compressors, hydraulic cylinders and pneumatic cylinders, among other similar mechanisms. It is the moving component that is contained by a cylinder and is made gas-tight by piston rings. In an engine, its purpose is to transfer force from expanding gas in   the   cylinder to   the crankshaft via a piston rod and/or connecting rod. In a pump, the function is reversed and force is transferred from the crankshaft to the piston for the purpose of compressing or ejecting the fluid in the cylinder. In some engines, the piston also acts as a valve by covering and uncovering ports in the cylinder.

II. LITERATURE REVIEW

The design of the piston is a complex process that involves several factors, such as the engine's operating conditions, performance requirements, material properties, and manufacturing processes. The piston's design must consider the piston's shape, size, weight, and material composition. Several studies have been conducted on the design of piston. "Design and Analysis of an Automotive Piston using Finite Element Method" by Amit Singh Yash Dhamecha and Vaibhav Saptarshi. This paper presents a finite element analysis (FEA) of an automotive piston to evaluate its strength, stiffness, and deformation under various operating conditions. "A Review of Piston Failure Analysis in Internal Combustion Engines" by Amit Singh Chahar and Ashutosh Kumar. This review paper provides an overview of the causes and mechanisms of piston failures in internal combustion engines. It covers various types of failures, including thermal fatigue, mechanical fatigue, and lubrication-related failures.

Table – 1: Property of Aluminium Alloy

Conclusion

The titanium alloy Ti-6Al-4V is widely used in pistons of supercars and this led us to the assumption that if it is used in such high-performance cars, then it’s possible that it can also be used in motorbikes. The material properties of titanium alloy were also suggesting the same but our analysis clearly demonstrates that it isn’t a feasible option. From our analysis results, it is concluded that Ti-6Al-4V Dom Head Piston is the best material for piston. This is due to the following reasons. 1) Its Factor of Safety (F.O.S.) is maximum amongst the one material. 2) Mass of Aluminum alloy is also least. This result is because of the design of the piston. The piston design of supercars is significantly different from the piston design of motorbikes. To make titanium alloy a feasible option, we need to make a lot of changes in the design of piston which will result in a change in the overall design of the engine which is beyond the scope of this work. Still, there’s a lot that can be done. The same can be done for other motorbikes/vehicles too. Other analyses apart from thermal and structural can also be performed for these materials. Also, these materials can be compared on the basis of cost like cost of manufacturing, cost of machining, etc.

References

[1] Vaishali R. Nimbarte and Prof. S.D. Khamankar, “Stress Analysis of Piston using Pressure Load and Thermal Load”, IPASJ International Journal of Mechanical Engineering (IIJME), August 2015. [2] Lokesh Singh, Suneer Singh Rawat, Taufeeque Hasan and Upendra Kumar, “Finite Element Analysis of Piston in ANSYS”, International Journal of Modern Trends in Engineering and Research. [3] Gadde Anil Kumar and Chandolu Nehemya Raj, “Design and Analysis of an I.C. Engine Piston and Piston Rings by using Three Different Materials”, [4] International Journal of Advances in Mechanical and Civil Engineering, April 2017. [5] Hitesh pandey, 2014 “Thermal Stress Analysis of a Speculative IC Engine Piston using CAE Tools” Int. Journal of Engineering Research and Applications Vol. 4, Issue 11(Version - 5), page.60- 64 [6] Dilip Kumar Sonar, 2015“Theoretical Analysis of Stress and Design of Piston Head using CATIA & ANSYS” International Journal of Engineering Science Invention. Volume 4 Issue 6 June 2015 Page .52-61 [7] A. P. Carlucci, A. Ficarella, D. Laforgia, and A. Renna, “Supercharging system behavior for high altitude operation of an aircraft 2-stroke diesel engine,” Energy Conversion and Management, vol. 101, pp. 470– 480, 2015. [8] Z. Pan and Q. He, “High cycle fatigue analysis for oil pan of piston aviation kerosene engine,” Engineering Failure Analysis, vol. 49, pp. 104–112, 2015. [9] L. Rebhi, B. Krstic, A. Boutemedjet et al., “Fatigue fracture analysis of an ADF antenna in a military aircraft,” Engineering Failure Analysis, vol. 90, pp. 476–488, 2018. [10] S. K. Bhaumik, M. Sujata, and M. A. Venkataswamy, “Fatigue failure of aircraft components,” Engineering Failure Analysis, vol. 15, no. 6, pp. 675–694, 2008. [11] B. Krstic, L. Rebhi, D. Trifkovic et al., “Investigation into recurring military helicopter landing gear failure,” Engineering Failure Analysis, vol. 63, pp. 121–130, 2016.

Copyright

Copyright © 2023 Mohan Kumar KS, Sudeep A, Bharath Gowda HR, Gangadhara CS, Charan H L. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.